Description
Quick Fix® Plus 6.4 Synthetic Urine is a 3-ounce version of Spectrum Labs’ patented lab urine, pre-mixed with urea. It’s a unisex formula, replicates real urine, is pH-balanced, and includes a temperature strip and heating pad for accurate temperature.
Instructions for Quick Fix Plus :
- Just before departing, open the Quick Fix container and place it in a microwave for approximately 10 seconds to heat it. If you can’t use a microwave, tape or rubber band the heating pad to the container at least 1 hour before your test.
- After heating, close the lid and shake the Quick Fix bottle. Check the heat label, which should read between 94° to 100° Fahrenheit. If it’s above 100°, let it cool for a moment. If it’s below 94°, heat it for a bit longer.
- To maintain the heat of the synthetic urine until your test, securely rubber band or tape the heating pad to the Quick Fix container. If you keep it close to your body, like in your pockets, it should maintain the temperature at 100° for at least 6 hours.
- Before collecting the sample, verify that the Quick Fix artificial urine temperature is between 94°-100°. Shake the container, and then pour the synthetic urine into the Collection Container.
- Quick Fix artificial urine can be reheated with hand-warmers as many times as needed.
- Please be aware that some settling may occur, so make sure to shake the container before and after you heat it and right before you take the test.
